Phistek P101VG, Руководство пользователя и инструкция по установке

Страница: 6 / 10

6
Main
Menu
OSD
H. Position −
Adjust OSD Menu horizontal position, press “UP” key to shift
Menu right, “DOWN” key to shift Menu left.
V. Position −
Adjust OSD Menu vertical position, press “UP” key to shift
Menu upward, “DOWN” key to shift Menu downward.
OSD Time −
Sets the time duration in seconds that the OSD is visible after
the last button is pressed.
Exit − Exit to previous Menu.
Language
English −
Press Up/Down key to move OSD bar to desired language,
then press to confirm. The OSD Menu will change to desired
language and return to Main Menu.
Francais −
Deutsch −
Italino −
Espanol −
日本語
−
繁體中文
−
简体中文
−
Portuguese −
한국어
−
русский −
Recall
Recall Color Yes No Press ”Yes” to reset Color to factory setting.
Recall All Yes No Press “Yes” to rest all settings back to factory setting, except
language.
Exit − Press “Exit” to return to Main Menu.
Information
Display
Information
−
Press Display information to display resolution and refresh
rate.
Exit − Press “Exit” to return to Main Men.
Exit − − Press “Exit” key will close OSD Menu and save the settings.
III.
For your safety
1. When move the monitor, always switch off power and disconnect all cables to avoid any danger.
2. Please use the power and signal cables correctly when install it.
3. In case of notice any abnormal smell or noise, please stop operation and call the nearest dealer or
service center.
IV. Support timing chart
Timing Mode
Reference
Standard
Resolution Pixel MHz FH KHz FV Hz Interlace
Mode 1 VESA 1280 x 800 83.5 49.702 59.810 NO
Mode 2 VESA 1280 x 768 795 47.78 59.87 NO
Mode 3 VESA 1024 x 768 65.000 48.363 60.004 NO
Mode 4 VESA 800 × 600 40.000 37.879 60.317 NO
Mode 5 VGA 640 x 480 25.17 31.47 59.94 NO
Mode 6 VGA 720 x 400 28.32 31.47 70.08 NO