Philips Streamium HK-1008-MCi900 2010, Руководство пользователя, Страница: 59 / 108

59
English
EN
2
From Home screen, select
[Settings]
>
[Clock settings]
>
[Date and time]
.
Or, press • SETTINGS on the remote
control to enter [Settings] .
3
In [Date and time] , select [Current date
and time] > [Manual] .
4
To enter date and time,
Press • or to select the entry
location;
Use the alphanumeric buttons to
•
enter desired digits;
Press
•
OK
to confirm.
You can also press • or
repeatedly, or press and hold or
until the desired digit appears.
Set date/time format
Select how date and time are displayed in the
clock.
1
Follow Step 1-2 under “ Manual setting ”.
2
In [Date and time] , go to [Time format]
or [Date format] to select options.
Network settings
Setup network
After the first-time setup, you can change
how MCi900 connectsto home Wi-Fi/wired
network:
Switch between different connection •
methods (wireless or wired,
automatic or manual);
Switch between different routers.
•
To do so, do the following:
1
From Home screen, go to
[Settings]
>
[Network settings]
>
[Setup network]
.
Or, press •
SETTINGS
on the remote
control to enter
[Settings]
.
2
Connect
MCi900
as you did in the first-
time setup (see ‘Connect to home Wi-Fi/
wired network’ on page 29).
Tip
According to the location and time zone you
•
select, the unit can have the clock time set
and adjusted automatically through the online
service over the Internet.
To check and change current location and time
•
zone, go to [Settings] > [Location and time
zone]
.
Through time signals from FM RDS radio
1
On the unit, turn on the FM radio, if
necessary.
Ensure that the FM antenna is •
connected properly (see ‘Connect
the FM antenna’ on page 26).
2
On the first location for preset stations,
store an FM RDS station that transmits
time signals.
3
From Home screen, select
[Settings]
>
[Clock settings]
>
[Date and time]
.
Or, press • SETTINGS on the remote
control to enter [Settings] .
4
In [Date and time] , select [Current date
and time] > [Automatic (RDS)] .
The unit searches for the first preset
»
station automatically.
The time is set according to time
»
signals from the station.
Manual setting
1
Turn on the unit, if necessary.
1 3
Automatic (Internet)
Automatic (RDS)
Manual