Welcome
Quick start guide
SPA2600
Specifications are subject to change without notice.
Trademarks are property of Koninklijke Philips Electronics N.V. or their respective owners.
2005 © Koninklijke Philips Electronics N.V. All rights reserved.
www.philips.com
312 247 501 069
Need help?
Online help: www.philips.com/support
Helpline
United Kingdom
0906 1010 016 (£ 0.15)
Multimedia Speaker
Connect
Enjoy
1
2
What’s in the box?
Subwoofer
Front satellites
Center satellite
Surround satellites
Wired remote control
Audio cables
Quick Start guide
Computer
Or
Or
Or
Laptop
MP3 Player
Other audio source
Power supply
Warranty
What else you'll need
Important notes
For United Kingdom only
Mains plug
This apparatus is fitted with an approved 13 Amp plug.
To change a fuse in this type of plug proceed as follows:
1 Remove fuse cover and fuse.
2 Fix new fuse, which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.
3 Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate
plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug
without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.
The severed plug must be disposed of to avoid a possible shock hazard should it
be inserted into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following code:
blue = neutral (N), brown = live (L). As these colours may not correspond with
the colour markings identifying the terminals in your plug, proceed as follows:
•
Connect the blue wire to the terminal marked N or coloured black.
•
Connect the brown wire to the terminal marked L or coloured red.
•
Do not connect either wire to the earth terminal in the plug, marked E
or coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath
of the lead- not simply over the two wires.
Copyright
Recording and playback of material may require consent. See Copyright Act 1956 and
The Performer's Protection Acts 1958 to 1972.
Disposal
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused. Please inform yourself about the
local separate collection system for electrical and electronic products, including
those marked by the crossed-out wheely bin symbol. Please act according to your
local rules and do not dispose of your old products with your normal household
waste
SPA2600_QSG_Single_EN.qxd 13-12-2005 13:45 Pagina 1
