49BDL4050D
26
- Press OK key, the bottom of the page will show the page number,
if page number over total page number, it will not change page and
show current page number at the bottom of the page.
www.philips.com/welcome
User Manual (English)
4.7. SmartCMS
1. Settings
1) Server IP: Your_SmartCMS_server_address
2) Account: admin
3) PIN Code: 0281(Default, which can be generate by server tool)
4) Version: Ver. 3 (default value)
You can select Ver. 2 or Ver. 3. And SmartCMS would download cms
contents from a Ver. 2 server or a Ver. 3 server.
a.
Ver. 3: You need to set server information (ip, account, PIN
Code) in the settings.
b.
Ver. 2: You need to install cms data from local storage for the
first time. And server information would be accessed from the local
cms content. The options in the settings, including IP, account, and PIN
Code, would be disabled.
5) Content: cms content can be stored in the internal storage, SD
card, and USB storage. By default, the target is internal.
a.
If server is connected, cms data would be downloaded from
SmartCMS server.
b.
If server is disconnected, cms data would be accessed from
local storage.
6) Local cms content (*.cms file)
a.
If content is set to be internal storage, *.cms should be stored
in the FTP root folder(high priority) or /sdcard/philips(low priority).
b.
If content is set to be USB storage or SD card, *.cms should
be stored in the root folder of external storage.
