background image

Version 5: September 2010 

 

 
Important! 

 

Please  read  this  manual  from  cover  to  cover  before  attempting  to  install,  operate  or  maintain  the  luminaires  to  which  it 
relates.  It  contains  important  installation,  operating,  maintenance  and  safety  procedures  which  you,  the  customer  must 
strictly comply with. 

Along  with  such  procedures  mentioned  in  this  document,  the  customer  should  also  observe  such  other  procedures 
generally applicable to lighting equipment. 

Please follow the instructions in this manual.  Selecon accepts no responsibility if the customer fails to do so.   

For  each  customer,  operating  conditions  will  vary,  sometimes  greatly.    Such  variations  may  affect  the  luminaires‟ 
performance.  Philips 

Selecon has no control over the customer‟s unique operating environment.  Hence, Philips Selecon 

makes  no  representations  or  warranties  concerning  the  luminaires‟  performance  under  the  customer‟s  actual  operating 
conditions.  All operating parameters must be validated for each customer application by the customer‟s technical experts. 

If the customer does not follow the installation, operating, maintenance and safety procedures in this manual, as well as 
those generally applicable to lighting equipment, the luminaire may not perform as expected.  More seriously, it may cause 
property damage, personal injury or other losses. 

Philips  Selecon  accepts  no  liability  for  direct,  indirect,  incidental,  special,  or  consequential  damages  resulting  from  the 
customer‟s  failure  to  follow  the  installation,  operating,  maintenance  and  safety  procedures  in  this  manual  or  those 
generally  applicable  to  lighting  equipment.    The  foregoing  limitation  extends  to  damages  for  personal  injury,  property 
damage,  loss  of  operations,  loss  of  profits,  loss  of  product  or  loss  of  time,  whether  incurred  by  the  customer,  the 
customer‟s employees or a third party. 

Philips  Selecon  used  all  due  care  in  preparing  this  manual.    However,  Philips  Selecon  accepts  no  liability  for  errors  or 
omissions.    Philips  Selecon  reserves  the  right  to  change  the  specifications  of  its  luminaires,  or  the  information  in  this 
manual, without necessarily giving its customers notice thereof. 

Installation, operation and maintenance are entirely at the customer‟s risk.  

Philips Selecon luminaires should be installed, operated and maintained by suitably qualified personnel.  Such personnel 
should have previous experience with lighting equipment as well as general electrical experience. 

This  manual  is  intended  to  provide  general  guidance  to  such  suitably  qualified  personnel.    For  specific  guidance  and 
technical support, contact Philips Selecon or its authorised representative. 

Information in this manual shall not be deemed a warranty, representation or guarantee concerning a luminaires‟ suitability 
or fitness for a specific purpose.   

Subject  to  the  right  to  use  its  luminaires,  Selecon  does  not  convey  any  right,  title  or  interest  in  its  intellectual  property, 
including, without limitation, its patents, copyrights and know-how. 

 

Safety Warnings: 

 

  

 

 

Not for residential use. 

   

    

 

 
CAUTION 

– DANGER OF BURNS 

- avoid contact by persons or materials. 

This Acclaim luminaire will get very hot during use. Please take care when handling to avoid burns 

– 

we recommend the wearing of gloves for focusing when the luminaire is on.

 

 

    

 

 

SAFETY

 - 

Mains Power Isolation

: The Acclaim range is fitted with a micro-switch that automatically 

disconnects the mains power when the lamp holder is removed. However, it is also recommended 
that the luminaire always be electrically isolated from mains power before re-lamping, cleaning or 
servicing.

 

  

 

 

CAUTION

: Risk of fire 

–maximum wattage lamp: 650W. 

   

 

 
This luminaire is not suitable for outdoor use. They are rated at IP00. 

 

 

  

 
The luminaire should be at least 1.5m / 5ft away from the nearest object it is lighting. 

 

  

= 90

o

 

 
The Acclaim range can be operated only through a range of angles 90

 either side of horizontal. 

 

 

Содержание Selecon Acclaim








Отзывы: