Philips SCD361, Руководство пользователя

Страница: 9 / 72

Frequently asked questions
This chapter lists the questions most frequently asked about the Philips baby monitor. If you can’t
find the answer to your question, please contact the Customer Care Centre in your country.
Question Answer
Why can’t I establish a
connection?
The units may be set to different channels. Set both units to the same
channel and wait 1-30 seconds for the connection to be established.
The baby unit may be out of range of the parent unit or there may be
too many walls and/or ceilings between the two units. Try a different
location or reduce the distance between the two units.
Why is the connection
lost every now and
then?
The baby unit may be out of range of the parent unit or there may be
too many walls and/or ceilings between the two units. Try a different
location or reduce the distance between the two units.
Why do I hear noise
or a schratching
sound?
There may be interference from another appliance or baby monitor.
Switch both units to another channel. Make sure both units are set to
the same channel.
The parent unit may be too close to a window, causing it to pick up
signals from other appliances or baby monitors. Move the unit away from
the window.
The baby unit may be out of range of the parent unit or there may be
too many walls and/or ceilings between the two units. Try a different
location or reduce the distance between the two units.
The batteries may be running low. Check the batteries and replace them,
if necessary.
Why doesn’t the baby
monitor manage the
specified range of 150
metres?
The specified range of 150 metres is only valid in open air. Inside the
house the range is limited by the number and type of walls and/or
ceilings between the two units. Change the position of one or both units
to optimise the range.
What happens when
there is a mains
failure?
If you are using the units from the mains without having put batteries in
them, the connection will be lost when there is a mains failure. If there
are batteries in both units, they will automatically switch to battery
power in case of a mains failure and the connection will not be lost.
EngliSh
9