5
2. Setting up the monitor
2. Setting up the monitor
2.1 Installation
Package contents
*DP
* Audio
Power
*HDMI
*USB A-B
* DVI
* VGA
Register your product and get support at
www.philips.com/welcome
Quick
Start
S Line
272S1
*Different according to region
Install the base
1.
Place the monitor face down on a
smooth surface. Pay attention not
to scratch or damage the screen.
2.
Hold the stand with both hands.
(1) Gently attach the base to the stand.
(2) Use your fingers to tighten the
screw located at the bottom of the
base.
(3) Use a screwdriver to tighten the
screw located at the bottom of the
base, and secure the base to the
stand tightly.
(4) Gently attach the stand to the VESA
mount area until the latch locks the
stand.
1
4
2
3
