
Alignments
6.
6.6
Total Overview SAM modes
Table 6-6 SAM mode overview
Main Menu
Sub-menu 1
Sub-menu 2
Sub-menu 3
Description
Hardware Info
A. SW version
e.g. “AND1E_0.7.31.0E
Display TV & Standby SW version and CTN serial
number
B. Standby processor version e.g. “14.01.02.00”
C. Production code
e.g. “see type plate”
Operation hours
Displays the accumulated total of operation hours.TV
switched “on/off” & every 0.5 hours is increase one
Shop operation hours
Displays the accumulated total of operation hours in
“shop mode”
Errors
Displays the most recent errors
Reset error buffer
Clears all content in the error buffer
Alignment
White point
Colour temperature
Normal
3 different modes of colour temperature can be
selected
Normal
Warn
Cool
White point red
LCD White Point Alignment. For values,
see Table
6-2 White tone default settings
and following.
White point green
White point blue
Ambilight
Select module
Brightness
Option numbers
Group 1
Group 2
Store
Initialise NVM
Store
Select Store in the SAM root menu after making any
changes
Software maintenance
Software events
Display
Display information is for development purposes
Clear
Test reboot
Test kernel crash
Test application crash
Hardware events
Display
Display information is for development purposes
Clear
Test setting
Digital info
Current frequency: 538
QAM modulation: 64-qam
Display information is for development purposes
Symbol rate:
Original network ID: 12871
Network ID: 12871
Transport stream ID: 2
Service ID: 3
Hierarchical modulation: 0
Selected video PID: 35
Selected main audio PID: 99
Selected 2nd audio PID: 8191
Install start frequency
000
Install start frequency from “0” MHz
Install end frequency
999
Install end frequency as “999” MHz
Default install frequency
Installation
Digital only
Select Digital only or D Analogue before
installation
D Analogue
RF4CE pairing tables
Clear paired remote control
Wi-Fi Direct settings
Reset Wi-Fi Direct Group
Development file
versions
Development 1 file version
Display information is for development purposes
Development 2 file version
18AC one zip software
Display information is for development purposes
Initial main software
NVM version
e-Sticker software
Upload to USB
Download from USB
Item “Channel list” removed from the user interface
NVM editor
Type number
see type plate
NVM editor; re key-in type number and production
code after SSB replacement
Production code
see type plate