631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2010 Philips Group • C0910
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
ProSpec Track Lighting
26000
Page 1 of 4
Track
6
8 Plain Track
7 Feed Track
47-5/8"
95-5/8"
143-5/8"
13/64"
13/64"
10
11
12
13
Feed
Feed
Feed
See Detail A ( pg 4)
2
5
1
3
4
1 3/16"
9
1 9/16"
1 5/8"
3/8"
13/64"
48"
96"
144"
1/16"
Features
1. Track:
6063T-5 structural aluminum extrusion; average wall thickness .08.
2. Flush Mounting Clips:
spring steel. Black or white nylon coated to prevent
rusting and marking ceiling. Furnished with track unit.
3. Conductors:
“U” shaped copper conductor, increases contact surface area
minimizes contact resistance provides reliable positive connection.
4. Insulated liner:
.040” wall, high temperature extruded thermoplastic.
5. Toggle Bolts and Screws:
furnished with track unit.
6. Dead End Cap:
molded thermoplastic.
7. Feed Track.
8. Plain Track.
9. Standoff Mounting Clip:
1/16” extruded aluminum, one screw mounting,
one screw tightening. 3/8” gap helps to compensate for ceiling irregularities.
Provides rigid support for dense loading of track.
10. Feed-in Connector Module:
included with feed track.
11. Removable Hole Plug:
for surface feed 3/8” or 1/2” trade size connector.
12. KO:
accepts, 3/8” or 1/2” trade connector for feed.
13. Wire Cover:
molded thermoplastic.
Mechanical
Track units plug together and lock securely to prevent accidental separation.
ProSpec track fixtures can be attached at any point along the track. Track units
may be field cut.
Electrical
(2) circuits. Each circuit is 120V, 60Hz, 20 AMP compatible. Each circuit has
dedicated neutral for maximum control flexibility. Track units are continuously
grounded throughout. Electrical conductors are concealed in an insulated liner
in the track. Intended for wiring to branch circuit building wire with ground, in
accordance with National and local codes.
Mounting
Surface:
ProSpec track can be surface mounted either flush to a surface or
with clips
1/16” clips are provided with the track and space the track 1/16” from the
ceiling.
3/8” standoff clips can be ordered separately. These space the track 3/8” from
the ceiling, provide a rigid support and a pleasing appearance on uneven ceilings.
Stem:
ProSpec track can also be suspended from horizontal surfaces or sloped
surfaces. Stems can be field cut to provide any length from a surface with a
maximum length of 3”.
A sloped surface (ceiling) adapter is available to allow the track to hang verti-
cally with the track opening horizontal to the floor.
Finish
All painted finishes are baked enamel.
Label
UL, I.B.E.W
Catalog No.
Plain Track
Feed Track
Finishes:
4’
8’
12’
4’
8’
12’
Matte White
26004WH
26008WH
26012WH
26001WH
26002WH
26013WH
Matte Black
26004BK
26008BK
26012BK
26001BK
26002BK
26013BK
