The PLOS-CM-KNX is a low profile recessed flush mount 360º ceiling
mount sensors that combines motion detection (PIR) and ambient light
level detection (PE) in one device. The sensor is powered directly by the
KNX network that is running between the KNX devices, eliminating the
need for additional network field wiring or network power cables. The
sensor can only be used when connected to a KNX network.
In applications such as office buildings, lecture theatres, and homes,
the PLOS-CM-KNX multi function sensor can be utilised to detect
different levels of motion and switch on the lights. The sensor can detect
movements over a 7.4m x 5.6m area at a mounting height of 2.4m.
When an area is unoccupied the sensor can detect this and the lights
can be automatically dimmed or switched off to provide energy savings.
The unit also incorporates a segmented click-up bezel surrounding the
motion sensor element. This enables a portion of the sensing field to be
readily masked to prevent nuisance detection from adjacent doorways
or corridors. In situations where it is critical to maintain precise lighting
control for individual workspaces, such as an office workstation or
even air traffic control centers, the PLOS-CM-KNX facilitates light
compensation.
Instructions
This unit is for indoor use only. It is designed for installation in a 64mm
diameter hole where the ceiling void is at least 40mm deep. Select an
appropriate dry indoor mounting location, as detailed in the location
guidelines on the following pages. Note that the product has two
functions, and the optimum mounting location for each individual function
may conflict with each other, and may require use of multiple sensors.
PLOS-CM-KNX
Ceiling Mount Universal Sensor
INSTALLATION MANUAL
