Play videos from storage devices 15
6 Play videos from
storage devices
Using the projector, you can access and play
video files stored on a local storage device.
Notice
The projector supports a USB storage
device that is formatted for FAT16 or
FAT32 file system.
Supported file formats
The following file formats are supported:
.dat/.mpg/.mpeg/.ts/.trp/.tp/.vob/.mp4/.mkv/.
avi/.flv/.3gp
1
Connect a USB storage device to the
USB
port on the projector.
•
Or insert a MicroSD card into the
MicroSD
slot on the projector.
MICRO SD
AV
HDMI 1
HDMI 2
USB
DC
microSD
2 Go to the projector home screen by
pressing
on the projector remote control
and then select
MOVIE
.
3 Select
USB
to open the USB storage device
or
TF
to open the MicroSD card.
Note
: Only
supported video files are displayed on the
screen. All folders and files are ordered
alphabetically by name.
4 Press the navigation buttons on the
projector remote control to select a video
file or a folder. To open a selected folder,
press the
OK
button. To return to the parent
folder, select
Up Folder
on the screen. To
exit the current folder and storage device,
press
on the remote control or select
RETURN
on the screen. If you select a
video file and wait more than 3 seconds,
the projector will begin playing a preview of
the video from the beginning.
5 Press the
OK
button or
on the remote
control to start playing a selected video file.
6 During video playback, press
on the
remote control to start, pause or resume
playback. Press
/
on the remote
control to skip to the previous/next video
file in the current folder.
While a video file is playing, you can press
the
OK
button on the remote control to
bring up the control bar at the bottom of
the screen. To instantly hide the control bar,
press or
.
While the control bar is visible, press /
on the remote control to select an option
and then press
OK
to confirm the action or
change the value. To close the dialog box of
an option, press
.
The following options are available on the
control bar:
•
Play
/
Pause
: Plays or pauses the video.
•
FB
: Rewinds the video quickly. The
rewinding speeds range from 2X to 32X.
When you move to the point you want,
press
to start playing at normal
speed.
•
FF
: Fast-forwards the video. The
forward speeds range from 2X to 32X.
When you move to the point you want,
press
to start playing at normal
speed.
•
Prev�
: Skips to the previous video in the
current folder.
•
Next
: Skips to the next video in the
current folder.
•
Stop
: Stops playing the video and
returns to the list of video files in the
current folder.
•
Repeat
: Toggles between the repeat
options. If
Repeat None
is selected, the
projector will stop playing videos after
the last video file in the current folder
has been played. If
Repeat 1
is selected,
the projector will play the current video
continuously. If
Repeat ALL
is selected,
the projector will cycle through all
the video files in the current folder
continuously.
•
Set A
/
Set B
/
None
: Use this option to
loop a segment of the video. To set the
start point for the loop, press the
OK
button when you see
Set A
. Then
Set
B
appears and you can press the
OK
button again to set the end point of the
loop. After these 2 steps, the video will
start playing in this loop. To deactivate
the loop, press the
OK
button when you
