22
EN
1) To start, press
OK
.
2) Select a speaker delay in the menu, then
press / to set the delay time.
3) Press
OK
to confirm and exit.
[Night Mode]
(Night Mode)
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
•
[On]
(On) – enjoy quiet viewing at night
(DVDs only).
•
[Off]
(Off) – enjoy surround sound with its
full dynamic range.
Video setup
On the
[Video Setup]
(Video Setup) page, you
can set the following options:
[TV Type]
(TV Type)
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
•
[PAL]
(PAL) - For PAL-system TV.
•
[Multi]
(Multi) - For TV that is compatible
with both PAL and NTSC.
•
[NTSC]
(NTSC) - For NTSC-system TV.
[TV Display]
(TV Display)
The TV format determines the aspect ratio of
display according to the type of TV you have
connected.
•
[4:3 Pan Scan]
(4:3 Pan Scan) – For 4:3
screen TV: full-height display with the
trimmed sides.
•
[4:3 Letter Box]
(4:3 Letter Box) – For 4:3
screen TV: wide-screen display with black
bars on the top and bottom of the screen.
4:3 Letter Box (LB)
4:3 Pan Scan (PS)
16:9 (Wide Screen)
•
[Wide Screen]
(Wide Screen) – For wide-
screen TV: display ratio 16:9.
[Picture Settings]
(Picture Settings)
Select a predefined set of picture color settings.
•
[Standard]
(Standard) – Original color
setting.
•
[Vivid]
(Vivid) – Vibrant color setting.
•
[Cool]
(Cool) - Soft color setting.
•
[Personal]
(Personal) – Customizes the
color setting. Set the level of brightness,
contrast, sharpness/tint and color
saturation, and then press
OK
.
[HDMI Setup]
(HDMI Setup)
When you connect this apparatus and TV with
an HDMI cable, select the best HDMI video
setting that your TV supports.
•
[HDMI Video]
(HDMI Video)– Select a
resolution for high defi nition videos.
•
[Wide Screen Format]
(Wide Screen
Format)– Select a display format for wide
screen videos.
•
[HDMI Deep Color]
(HDMI Deep
Color)– Create vivid images with more
color details when the video content
is recorded in Deep Color and the TV
supports this feature.
•
[EasyLink Setup]
(Easylink Setup)– This
unit supports Philips EasyLink which uses
the HDMI CEC (Consumer Electronics
Control) protocol. You can use a single
remote control to control EasyLink
compliant devices that are connected
through HDMI.
•
[EasyLink]
(EasyLink) - Enable or
disable the EasyLink feature.
•
[One Touch Play]
(One Touch
Play) - After you enable this feature,
the connected HDMI CEC TV
automatically switches to the HDMI
input channel when you play a disc.
•
[One Touch Standby]
(One Touch
Standby)- After you enable this feature,
you can press and hold on the
remote control of this unit to switch
MCD785_51_V4.0.indb 22
6/21/2012 1:27:46 PM
