19
English
EN
6 Listen to radio
Store radio stations
automatically
If no radio station is stored, the unit can store
radio stations automatically.
1
Press
RADIO
.
»
[AUTO INSTALL - PRESS PLAY,
STOP CANCEL]
(auto install - press
play, stop cancel) (press
to start
automatic installation, or press to
cancel) is displayed.
2
Press
.
»
The unit automatically stores radio
stations with sufficient signal strength.
»
After all available radio stations are
stored, the first stored radio station is
broadcast automatically.
Tune to a radio station
1
In radio mode, press and hold / (
/ ) (or / on the main unit )for
over 3 seconds.
»
[
SEARCHING
] (searching) is displayed.
»
The radio tunes to a station with
strong reception automatically.
2
Repeat step 1 to tune to more stations.
To tune to a weak station:
press /
repeatedly until you find optimal
reception.
Tip
•
[STEREO]
(stereo) is the default setting for tuner
mode.
•
In tuner mode, you can press
OK
repeatedly to switch
between
[STEREO]
(stereo) and
[MONO]
(mono).
The unit memorizes your setting even if you turn off
the unit or turn to other sources.
Program radio stations
Note
•
You can program a maximum of 20 preset radio
stations.
Program radio stations automatically
In radio mode, press and hold
PROGRAM
for
more than three seconds to activate automatic
programming.
»
[AUTO]
(auto) is displayed.
»
All available stations are programmed in the
order of waveband reception strength.
»
The first programed radio station is
broadcast automatically.
Program radio stations manually
1
Tune to a radio station.
2
Press
PROGRAM
to activate programming.
3
Press / (or / on the main unit)
to allocate a number from 1 to 20 to this
radio station, and then press
PROGRAM
to confirm.
»
The preset number and the frequency
of the preset station are displayed.
4
Repeat the previous steps to program
other stations.
MCD785_51_V4.0.indb 19
6/21/2012 1:27:44 PM
