15
Mechanical Instructions
0. General
1.Remove the rear cover
2. Remove pedestal as shown in Fig. 4.
3. Video panel
To be able to perform measurements and repairs on the "circuit
boards", these unit should placed in the service position first.
-Remove right and left lib (screw cover) on the back cover
as shown in Fig. 1.
-Remove 4 screws as shown in Fig. 2.
-Remove back cover as shown in Fig. 3.
- Disconnect the wire between metal shield of Video panel and
CRT neck as shown in Fig. 5.
- Disconnect the CRT ground "1703" from Video panel.
lids (screw cover)
screw
screw
screw
screw
Fig. 1
Fig. 2
Fig. 3
Rear cover
Pedestal ass'y
Clip
Video Panel
Fig. 4
Fig. 5
=======>
================>
================>
M38 107B4
Содержание M38 107B4
Страница 18: ...18 Go to cover page Wiring Diagram M38 107B4 ...