Selecting a source
With the source buttons on the remote control or with
SOURCE on the set you select
– which sound you want to play on the DVD recorder
system,
– what you want to record with the DVD recorder
system: a TV programme, a satellite programme, a video
tape you play on your VCR or camcorder, etc.
The following sources are available for recording: MON,
SAT, CAM1/2,VCR and GAME.
1
Press and hold a source button on the remote control for
1 second to select a source:
DVD: to play a disc (DVD, Audio CD, MP3, …).
MON (“monitor”): shows the TV channels stored in the
DVD recorder system. Select the TV channel which you
want to record.
To switch between DVD and MON, press the button again.
Note: TV programmes are stored in your TV and in the
DVD recorder system.This is why you can record a
TV programme while watching another programme.
to play the sound of the television set on the DVD
recorder system.
to select the radio tuner of the DVD recorder system.
to play the sound of or to record from a connected
satellite receiver.
to select the camcorder inputs on the front.To switch
between CAM1 and CAM2, press the button again.
to play the sound of a connected CD player.
to play the sound of a connected CD recorder or tape
deck.To switch between CDR and TAPE, press the button
again.
to play the sound of or to record from a connected VCR or
game console.To switch between VCR and GAME, press
the button again.
2
If the selected video source does not show on your TV:
– switch off any other video equipment connected to
EXT-2 AUX I/O and
– set your TV to the correct audio/video channel.
Such channels may be called AUX, AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1, EXT2 or
EXTERNAL IN, etc.These channels are often near
channel 00.
Note: If a source is not installed on the DVD recorder system
(see chapter “Input settings” on page 54), you cannot select it
by pressing SOURCE on the DVD recorder system. When you
press the corresponding source button on the remote control,
SOURCE NOT AVAILABLE
will scroll on the display of the
DVD recorder system.
Selecting another source while recording
While recording from a source, you can select another
source on the DVD recorder system. Please be aware that
not all sources will be available.
On the Component Video / Progressive Scan output, you
can see only the recorded picture while recording.
Selecting an S-Video recorder connected to
EXT-2 AUX I/O
When you select an S-Video recorder connected to the
Scart socket EXT-2 AUX I/O on the DVD recorder system,
set the DVD recorder to S-Video. See
Video output
in
“
t
Picture
” on page 47.
Do not forget to switch the DVD recorder system back to
RGB + CVBS
when you select another source.
Sources
19
English
