2
1
3
* Differences according to regions.
Display design and accessories may differ from those illustrated above.
X2
X2
X2
Unpacking
Connecting the cabinets
Rear/top/side/bottom views
Notes:
1. After unpacking, ensure that the modules are in good
condition. If anything is damaged or broken, please
contact your local service center immediately.
2. Use a pair of scissors to cut vacuum packaging, then
take the modules out of the package. Be extremely
careful not to damage the module when using the
scissors.
3. It is required to wear anti-static gloves before han-
dling the cabinet.
4. Do not place the display vertically on the floor, as it
may fall down and get damaged. (The damage will
not be covered by warranty)
Removing the
opening
Before breaking the opening,
determine the number of
displays to install and the
installation layout to form a
large video wall array.
1
1
2
3
4
2
3
4
POWER IN connector
POWER OUT connector
1
2
Mounting holes for screw bolt
CHECK button
DATA connector
DATA connector
X2
d
Not included:
1
2
c
b
a
*
*
T style inner hexagon
wrench, size 7
Optional accessory
CTN: BM907006
*
Not included
*
*
Optional accessory
CTN: BM907000
Optional accessory
CTN: BM907005
Quick start guide: 1 pcs
Power cable
(daisy chain): 2 pcs
LAN cable
(RJ45, CAT-5): 2 pcs
