Philips IntelliVue Series, Инструкция по установке и обслуживанию

Страница: 482 / 522

Procedure
B-6
Web Installation on the Database Server
Step 7. Shutdown and restart the Database Server using the
Shutdown
application of the
Shutdown
menu in the
Service
window.
Web User
Access Config
Tool
The Information Center Web User Access Config Tool is used by support users to setup users
and their access privileges. It is recommended that at installation time, at least one user
(defined by the hospital) is configured.
The Web Config Tool can be accessed from any PC connected to the intranet. Once the
support user has logged onto the PC and has access to a supported web browser:
Step 1. Open the browser and enter the hostname of the M3154 Master Database Server in
the following syntax: http://hostname/
Step 2. Once the connection is established, a login screen opens.
This window is used set the
Username
and
Password
for accessing patient data on the
Server to ones specified by the customer. The following procedure describes how to add
users.
Note The default setting for the Username is ServiceUser . The default setting for the password is
M3150 . ServiceUser does not have access to patient data.
It is the responsibility of the hospital to manage clinical web access and audit trail data.
Step 1. Login to the Information Center Web using the Username and password listed above.
Step 2. Click on the Clinician Management hyperlink in the left frame.
Step 3. Click on the Add Clinician hyperlink.
Step 4. In the Username field, type in a user name defined by the hospital.
Step 5. Type in the First Name of the user in the First Name field.
Step 6. Type in the Last Name of the user in the Last Name field.
Step 7. In the New Password field type in a password.
Step 8. Re-Enter the New Password.
Step 9. Enable the Administrator box if this person will manage the clinical web access
and audit trail data.
Step 10. Select the Update button.
Step 11. Add another user using this procedure. Users are to be defined by the hospital.
Clinical Operators with administrative privileges can add/remove Information Center
Web clinicians and set up their access privileges. Clinical operators without
administrative privileges can only change their password.
After login, a patient list window is presented. In this window, all beds from all clinical units
that the clinician has access to are displayed. Each M3154 Database Server is listed, and the