Philips IntelliVue Series, Инструкция по установке и обслуживанию

Страница: 271 / 522

Configuration
Software Installation & Configuration
6-45
Setup Monitor
Label Procedure
Step 1. Assign M3/M4/IntelliVue
Monitor Labels
to
Bed Labels
as follows:
• Click on (highlight) the first Monitor Labels icon in the left column of the
Equipment Setup for Monitor Labels field.
• Click on (highlight) the first Label # in the Label # column to activate it for assigning
a Bed Label .
• Click Setup Monitor to bring up the Map Monitor to Monitor label #X window
for that Label # .
• Click on (select) the first Monitor Label in the Label equipment list.
• Click on (highlight) the Bed Label to be assigned to that patient monitor from the
Located at bed list.
• Click OK to enter that M3/M4/IntelliVue Monitor Label and Bed Label assignment in
the Equipment Setup for Monitor Labels field .
Step 2. Repeat Step 8 for each Monitor Label and Bed Label in the Equipment Setup
for Monitor Labels field.
Note The
Monitor Label
must also be entered in the Patient Monitor.
• See the
M3/M4 or IntelliVue Patient Monitor User’s Guide
for more details.
Setup Switch
Procedure
Step 1. Assign M3/M4/IntelliVue Monitoring Equipment on Switch Port Numbers to
Bed Labels as follows:
• Click on (highlight) the desired
Switch
in the left column of the
Equipment Setup
for Selected Switch
field.
• Click on (highlight) the desired
Port
in the
Port
column to activate it for assigning a
patient monitor.
• Click
Setup Monitor
to bring up the
Map Monitor to Port #X
window for that
Port
#
.
• Click on (highlight) the
Bed Label
in the
Located at bed:
list that the M3/M4/
IntelliVue with that
Monitor Label
will be assigned.
• Click
OK
to enter that M3/M4/IntelliVue
Monitor Label
and
Bed Label
assignment in
the
Equipment Setup for Selected Switch.
Step 2. Repeat Step 10 for each
Port #
and
Switch
in the list.
When all patient monitors have been assigned:
Click Next> to save changes and advance to the next window.