10
(Cable not supplied)
Set up network
1
Connect the home theater to a network
router through wired or wireless network
connection. This home theater has a built-in
Wi-Fi for easy access to the wireless network.
2
Turn on your TV and switch to the correct
source for the home theater.
3
Press (
Home
).
4
Select
[Setup]
, then press
OK
.
5
Select
[Network]
>
[Network Installation]
,
then press
OK
.
•
For wired network, select
[Wired
(Ethernet)]
and press
OK
.
•
For wireless network, select
[Wireless
(Wi-Fi)]
and press
OK
.
6
Follow the instructions on the TV to
complete the setup.
»
The home theater connects to the
Internet. If connection fails, select
[Retry]
,
then press
OK
.
7
Select
[Finish]
, then press
OK
to exit.
Caution
•
Familiarize yourself with the network router,
media server software and networking
principles before attempting to connect the
home theater to a computer network. If
necessary, read documentation accompanying
network components. Philips is not responsible
for lost, damaged or corrupt data.
LAN
www
Option 3: Connect audio through a digital
optical cable
Note
•
The digital optical cable or connector might be
labeled as
SPDIF OUT
or
OPTICAL OUT
.
(Cable not supplied)
Connect to a computer
network and the Internet
Connect the home theater to a computer
network and enjoy:
•
Multimedia content streamed from
your computer :
view photos, play
music and watch video files streamed
from your computer (see ‘Play from PC
(DLNA)’ on page 16).
•
Net TV :
‘Browse Net TV’ on page 17).
•
Software update :
update the software
of the home theater through the
network (see ‘Update software from
the network’ on page 24).
What you need:
•
A network router (with DHCP
enabled).
•
A network cable (RJ45 straight cable).
•
A computer with media server
software installed (see ‘Set up media
server software’ on page 16).
•
For Net TV and software update,
make sure that the network router
has access to the Internet and is not
restricted by firewalls or other security
systems.
TV
EN
Содержание HTS9540
Страница 2: ......
