Philips HTS5110, Руководство пользователя

Страница: 18 / 21

16
10 Index
A
amplifier 14
audio
synchronize with video 10
audio input mapping
11
C
care
3
change settings 12
connect
guide 6
TV 7
connectors 6
contact us 15
E
EasyLink
settings 11
F
file formats
14
H
HDMI CEC (see Easylink)
11
M
MP3
play 11
O
one-touch play
11
one-touch standby 11
overview
connectors 6
main unit 4
remote control 5
P
picture
options 10
slide show 10, 10
thumbnail overview 10
troubleshooting 15
If the wireless connection fails, • [PAIR
FAIL] is displayed, and the blue and green
indicators on the subwoofer remain lit.
Check whether there is any interference
from nearby electronic devices. Remove the
conflict or strong interference, then repeat
the above procedures.
No sound.
Ensure that the audio cables are connected
•
and select the correct input source (for
example,
AUX
,
USB
) for the device you
want to play.
No sound on HDMI connection.
You might not hear any sound if the •
connected device is not HDCP (High-
bandwidth Digital Content Protection)
compliant or only DVI compatible. Use an
analog or digital audio connection.
Ensure that the
• [HDMI Audio]
is enabled.
No sound from TV program.
Connect an audio cable from the audio •
input on the home theater to the audio
output on the TV. Then select the correct
input source, for example,
AUX
or
COAX
.
Distorted sound or echo.
Ensure that the TV volume is muted or set
•
to minimum if you are playing audio through
the home theater.
Audio and video are not synchronized.
1) Press
• AUDIO SYNC
. 2) Press
+/-
within
five seconds.
Play
The contents of a USB storage device cannot be read.
Ensure that the format of the USB storage
•
device is compatible with the home theater
(see ‘Product specifications’ on page 14).
Ensure that the USB storage device
•
is formatted with a file system that is
supported by the home theater (note that
NTFS is not supported).
‘No entry’ or ‘x’ sign appears on the TV.
The operation is not possible. •
EasyLink feature does not work.
Ensure that the home theater is connected
•
to a Philips brand EasyLink TV and that
EasyLink is on.
I do not want my home theater to be switched
on when I switch on my TV.
This is the correct behavior for Philips •
EasyLink (HDMI-CEC). To make the home
theater work independently, switch off
EasyLink.
EN