14
EN
5
To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•
The music streaming may be interrupted by obstacles
between the device and this product, such as wall,
metallic casing that covers the device, or other devices
nearby that operate in the same frequency.
•
If you want to connect this product with another
Bluetooth device, press and hold on the remote
control to disconnect the currently connected
Bluetooth device.
Connect Bluetooth via NFC
NFC (Near Field Communication) is a
technology that enables short-range wireless
communication between NFC-enabled devices,
such as mobile phones.
What you need
• A Bluetooth device with NFC function.
• For pairing, tap the NFC device on the
NFC
tag of this product.
1
Enable NFC on the Bluetooth device (see
the device' s user manual for details).
2
Tap the NFC device onto the
NFC
tag of
this product until this product beeps.
•
For first time connection, on some
mobile devices prompt for pair-up
appears, select "YES" for connection.
»
When the Bluetooth connection
succeeds,
BT
is displayed on the display
panel.
»
If the connection fails,
BT
on the
display panel blinks continuously.
3
Select and play audio files or music on
your NFC device.
• To break the connection, tap again the
NFC device onto the
NFC
tag on this
product.
MP3 player
Connect your MP3 player to play your audio
files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the
AUDIO IN
connector on this product.
2
Press
AUDIO IN
on the remote control.
3
Press the buttons on the MP3 player to
select and play audio files or music.
USB storage devices
Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
What you need
• A USB storage device that is formatted for
FAT or NTFS file systems, and complies
with the Mass Storage Class.
1
Connect a USB storage device to this
product.
2
Press
USB
on the remote control.
3
Use the remote control to control play.
• Press
to start, pause or resume
play.
• Press / to skip to the previous or
next track.
• During USB play, press and hold
USB
to
enter repeat mode, then press
USB
to
select one of the following play modes.
•
RPT-TRACK
: repeat the current
track.
•
RPT-ALL
: repeat all the tracks in
one folder.
•
RPT-RAND
: play randomly in one
folder.
•
RPT-OFF
: exit repeat or shuffle
play mode.
