Philips HTL4111B, Руководство пользователя, Страница: 13 / 18

11
EN
Note
•
This product may not be compatible with certain types
of USB storage device.
•
If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
•
Digital camera PTP protocols are not supported.
•
Do not remove the USB storage device while it is
being read.
•
DRM-protected music files (MP3, WMA) are not
supported.
•
Support a USB port: 5V , 1A.
Auto standby
When playing media from a connected device,
the SoundStage automatically switches to
standby if:
• no button is pressed for 18 minutes, or
• no audio/video play from a connected
device (except USB) for 18 minutes.
Apply factory settings
You can reset this product to the default
settings programmed at the factory.
1
In standby mode, press and hold button
on the main unit for at least 5 seconds
until the product powers on.
6 Update software
To get the best features and support, update
your product with the latest software.
Check software version
1
In any source mode, press .
2
Press AUX / AUDIO IN twice on the
remote control.
»
The software version number is
displayed.
Update software via USB
1
Check the latest software version on
www.philips.com/support.
• Search for your model and click on
"Software and drivers".
2
Download the software into a USB storage
device.
a
Unzip the download if zipped, and
make sure that the unzipped folder is
named "HTL4110B_12.BIN".
b
Put the "HTL4110B_12.BIN" folder in
the root directory.
3
Connect the USB storage device to the
USB connector of this product.
4
Press
USB
on the remote control, within 5
seconds press twice, and VOL + once,
then hold down .
»
If an upgrade file is detected, [UPG]
will be fast flashed.
»
If an upgrade file is not detected,
[ERROR] will be slowly flashed.
5
Press to start the update.
»
[UPG] is displayed.