11
EN
6 Update software
To get the best features and support, please
visit www.philips.com/support to check if the
latest software version is available. If an update
software is offered, you can upgrade the
firmware via USB.
Check software version
1
In any source mode, press .
2
Press
AUX
/
AUDIO IN
twice on the
remote control.
»
The software version number is
displayed.
7 Product
specifications
Note
•
Specifications and design are subject to change without
notice.
Amplifier
•
Total output power:
80W RMS (+/- 0.5 dB, 10% THD)
•
Frequency response: 20 Hz-20 kHz / ±3 dB
•
Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
•
Input sensitivity:
•
AUX: 2 V rms
•
AUDIO IN: 1 V rms
Audio
•
S/PDIF Digital audio input:
•
Coaxial: IEC 60958-3
•
Optical: TOSLINK
USB
•
Compatibility: Hi-Speed USB (2.0)
•
Class support: USB Mass Storage Class
(MSC)
•
File system: FAT16, FAT32, NTFS
•
Maximum memory support: < 64 GB
• Supports MP3 and WMA file formats
•
Sampling frequency:
•
MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz,
22 kHz, 24 kHz, 32 kHz, 44.1 kHz,
48 kHz
•
WMA: 44.1 kHz, 48 kHz
•
Constant bit rate:
•
MP3: 8 kbps-320 kbps
•
WMA: 32 kbps-192 kbps
•
Version:
•
WMA: V7, V8, V9
HTL4110B_79_UM_EN.indd 11
9/23/2014 4:38:42 PM
