background image

10

EN

• 

The operational range between the main 

unit (left and right speakers) and a NFC 

device is approximately 10 meters (30 

feet).

Enable NFC on your Bluetooth device (see 

the user manual of your device for details).

Tap the NFC device on the 

NFC

 tag of 

this product until you hear a beep sound 

from this product.

 

»

The NFC device is connected to 

this product via Bluetooth. 

[BT] 

is 

displayed.

Select and play audio files or music on 

your NFC device.

• 

To break the connection, tap the 

NFC device with the 

NFC

 tag on this 

product again.

USB storage devices

Enjoy audio on a USB storage device, such as an 

MP3 player and USB flash memory, etc.

What you need

• 

A USB storage device that is formatted for 

FAT or NTFS file systems, and complies 

with the Mass Storage Class.

• 

A USB extension cable, if the USB storage 

device does not fit into the connector.

•  An MP3 or WMA file on a USB storage 

device.

Connect a USB storage device to the 

SoundStage.

Press 

USB

 on the remote control. 

 

»

[USB]

 is displayed.

Use the remote control to control play.

Button Action

Start, pause or resume play.

   / 

Skip to the previous or next track.

Note

 

This product may not be compatible with certain types 

of USB storage device.

 

If you use a USB extension cable, USB HUB, or USB 

multi-reader, the USB storage device may not be 

recognized.

 

Digital camera PTP protocols are not supported.

 

Do not remove the USB storage device while it is 

being read.

 

DRM-protected music files (MP3, WMA) are not 

supported. 

 

Support a USB port: 5V  , 1A.

Auto standby

When playing media from a connected device, 

the SoundStage automatically switches to 

standby if:

• 

no button is pressed for 30 minutes, or

• 

no audio/video play from a connected 

device (except USB) for 30 minutes.

Apply factory settings

You can reset this product to the default 

settings programmed at the factory.

In standby mode, press and hold   button 

on the main unit for at least 5 seconds 

until the product powers on.

HTL4110B_79_UM_EN.indd   10

9/23/2014   4:38:42 PM

Содержание HTL4110B



















Отзывы: