8
EN
1
Using an optical cable, connect the
OPTICAL IN
connector on your
SoundStage to the
OPTICAL OUT
connector on the TV or other device.
•
The digital optical connector might be
labeled
SPDIF
or
SPDIF OUT
.
Option 2: Connect audio through a
digital coaxial cable
Good quality audio
1
Using a coaxial cable, connect the
COAXIAL IN
connector on your
SoundStage to the
COAXIAL/DIGITAL
OUT
connector on the TV or other
device.
•
The digital coaxial connector might be
labeled
DIGITAL AUDIO OUT
.
Option 3: Connect audio through
analog audio cables
Basic quality audio
1
Using an analog cable, connect the
AUX
IN
connector on your SoundStage to the
AUDIO OUT
connectors on the TV or
other device.
VCR
5 Use your
SoundStage
This section helps you use the SoundStage to
play media from a wide range of sources.
Before you start
•
Make the necessary connections described
in Quick start guide and User manual.
•
Switch the TV to the correct source for
the SoundStage.
Adjust the volume
1
Rotate the power knob or press
VOLUME
+/-
on remote control to increase or
decrease a volume level.
•
To mute sound, press .
•
To restore the sound, press again or
press
/-
.
Choose your sound
This section helps you choose the ideal sound
for your video or music.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press
SURR
repeatedly to select surround
mode or stereo mode.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundStage.
1
Press
/-
or
BASS +/-
to change
the treble or bass level.
HTL4110B_79_UM_EN.indd 8
9/23/2014 4:38:41 PM
