Philips HTB7560KD, Руководство пользователя

Страница: 32 / 52

30
EN
4
Press the Navigation buttons and OK to
select and change:
• [Night mode] : For quiet listening,
decrease the volume of loud sounds
on your home theater. Night mode
is only available in DVDs and Blu-ray
discs with Dolby Digital, Dolby Digital
Plus, and Dolby True HD soundtracks.
• [HDMI Audio] : Set the HDMI audio
output from your TV, or disable HDMI
audio output from the TV.
Parental control settings
1
Press ( Home ).
2
Select
[Setup]
, and then press
OK
.
3
Select
[Preference]
, and then press
OK
.
4
Press the Navigation buttons and OK to
select and change:
• [Change Password] : Set or change
your password for parental control
access. If you do not have a password
or have forgotten your password, enter
0000 .
•
[Parental control]
: Restrict access
to discs that are recorded with age
ratings. To play all discs, irrespective of
the ratings, select 8 or [Off] .
Display settings
1
Press ( Home ).
2
Select
[Setup]
, and then press
OK
.
3
Select
[Preference]
, and then press
OK
.
4
Press the Navigation buttons and OK to
select and change:
• [Auto subtitle shift] : Enable or disable
automatic repositioning of subtitles on
TVs that support this feature.
•
[Display panel]
: Set the brightness of
the home theater front panel display.
• [VCD PBC] : Enable or disable the
content menu navigation of VCD and
SVCD discs with Play Back Control
feature.
Energy saving settings
1
Press (
Home
).
2
Select [Setup] , and then press OK .
3
Select [Preference] , and then press OK .
4
Press the
Navigation buttons
and
OK
to
select and change:
•
[Screen saver]
: Switch the home
theater to screen saver mode after 10
minutes of inactivity.
• [Auto standby] : Switch the home
theater to standby after 30 minutes of
inactivity. This timer works only when a
disc or USB play is paused or stopped.
• [Sleep timer] : Set the duration of the
sleep timer so that the home theater is
switched to standby after the specified
period.
Speaker settings
1
Press (
Home
).
2
Select [Setup] , and then press OK .
3
Select [Advanced] , and then press OK .
4
Press the
Navigation buttons
and
OK
to
select and change:
•
[Enhanced audio]
: Select
[On]
to
enable audio post processing at the
speaker and enable karaoke settings
(if your product supports Karaoke).
To play the original audio of the disc,
select [Off] .
Tip
•
Enable audio post processing before you select a
predefined sound mode (see 'Sound mode' on page 28).