Philips HR 8901, Руководство по обслуживанию

Страница: 1 / 9

Vision Vacuum cleaner
HR 8901
HR 8903
HR 8905
HR 8907
HR 8909
Philips Domestic Appliances and Personal Care
PRODUCT INFORMATION
− Maximum air displacement : 34 l/sec.
− Maximum vacuum water column : 275 cm
− Power consumption (IEC) 225V : 1200W
− Dust storage capacity : 4 litres
− Cord length (depends on version) : 6 or 8.5 metres
− Filter system (depends on version) : Paper dustbag
: Exhaust air filter
: Motor inlet filter
: or carbon filter
− Dimensions cleaner : 48 x 30 x 25 cm
− Weight without accessories : 6.4 kg
− Noise : 75 dB
OPTIONAL
Cotton dustbag HR 6935 (4822 480 10072)
Paper dustbag set HR 6938 (4822 015 70049) economy
Paper dustbag set HR 6938 (4822 015 70057) hygiene
Hard floor nozzle HR 6943 (4822 479 20222)
Carbon inlet filter HR 6949 (4822 480 20145)
Active carbon filter set HR 6968 (items 41 + 42)
Dust sensor HR 6953 (4822 452 80167)
Turbo brush HR 6988 (4822 479 20196)
S-class filter HR 6992 (4822 480 10084)
S-class filter set HR 6993 (items 48 + 49)
ADJUSTING THE PCB ON THE MOTOR TO 220V, 60Hz
1. Make sure that the potentiometer (item 58) is set at
min. position.
2. Adjust the potentiometer on the PCB (item 44) on the motor to
220V/60Hz. to allow the motor to run smootly.
Please note: * that the standard setting of the PCB is 230V, 50Hz.
* that there are open-circuit voltages on all wires.
MSH coding :
8838 901 00000 (pearl blue)
8838 907 00000 (pearl blue)
8838 903 00000 (ceram white) 8838 909 00000 (faded blue)
8838 905 00000 (ceram white)
SERVICE INFORMATION
− To open the appliance, first remove the panel (item 13) with a big
screw driver (V) to disconnect the 4 snap locks (the 4 screws of
button panel item 39 can be loosed) and then remove the two
pedals (items 1 and 14) with a pin (W), max. diameter 2.5 mm.
− Power meter (8838 000 60300) is a commercial item with a fixed
air displacement which measures the vacuum of the appliance.
− Component configuration on exploded view may differ in case of
specific versions. However, the actual components are
distinguished by means of code numbers.
− If a repair has been made, make sure that all functions of the
appliance are working correctly.
− The spare parts have been standarized as much as possible.
(x) = standarized spare part in applinance concerned.
x = original spare part in applinance concerned.
− Item 16 Cotton dustbag is used in those countries where paper
dustbags are not available.
− Item 17 suction hose must be 460 mm in the x versions and must
be shortened to 420 mm in the (x) versions.
− Item 19 wire beam is provided with 4 connecting wires (brown
and blue to function in the version HR 8909).
− Item 120 up to and including 137. The assembly of accessories
depends on the national version.
− Item 21 is provided with the long cord-winder spring; both long
and short cords can be used in combination with this spring.
− To disassemble the cordwinder use TORX screw driver no T15,
which is one of a set consisting of T20, T15, T10, T9, T8, T7 and
T6 = 4822 395 50145.
− Depending on the original cord, the spare cord must be
shortened from 8.5 into 6 metres.
− Item 37 is provided with a control button to activate the
microswitch.
− Item 34. Remove the control lever in the versions without
microswitch.
− Item 43 air valve opens to cool the motor if the air displacement is
too low or if the air flow is blocked.
− All vacuum cleaners can switched on with or without (remote
control) hose.
4322 277 00004
99/06
PCS 101 240
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands
©
Copyright reserved Subject to modification
!
Service
Information
!
Service
Information
!
Service
Information