Philips HP8540, Руководство пользователя

Страница: 9 / 116

As the table shows, the first session of a tanning course must always last 7 minutes, irrespective
of the sensitivity of the skin.
If you think that the sessions are too long for you (e.g. because your skin feels taut and tender after
the session), we advise you to reduce the length of the sessions by e.g. 5 minutes.
Duration of the tanning
session for each separately
treated part of the body
For persons with
very sensitive skin
For persons with
normal sensitive
skin
For persons with
less sensitive skin
1st session 7 minutes 7 minutes 7 minutes
rest of at least 48 hours
2nd session
10 minutes 20 minutes 30 minutes*
3rd session 10 minutes 20 minutes 30 minutes*
4th session 10 minutes 20 minutes 30 minutes*
5th session 10 minutes 20 minutes 30 minutes*
6th session 10 minutes 20 minutes 30 minutes*
7th session 10 minutes 20 minutes 30 minutes*
8th session 10 minutes 20 minutes 30 minutes*
9th session 10 minutes 20 minutes 30 minutes*
10th session 10 minutes 20 minutes 30 minutes*
*) or longer, depending on your skin sensitivity.
Preparing for use
You can easily move and store the appliance in transport position.
The appliance is easier to lift if you do so together with another person (Fig. 2).
If you have to lift the appliance by yourself, use the handle (Fig. 3).
1 To open the appliance, move the slides in the direction of the arrow (Fig. 4).
Pull up the stand and the lamp unit (Fig. 5).
Put the tanning appliance in the position indicated (Fig. 6).
Pull up the lamp unit to horizontal position. Use the handle to do this. (Fig. 7)
You hear clicks when you move the lamp unit past certain fixed positions.
Note: Instead of using the above step-by-step method, you can also pull the lamp unit up by its handgrip
in one single movement (Fig. 8).
5 Turn the lamp unit a quarter turn (Fig. 9).
6 Place the tanning appliance beside a bed. (Fig. 10)
The distance between the UV filter and the surface on which you are lying down (e.g. the bed)
must be 90cm.
7 Slide the collar down the stand to unlock the height adjustment lock. Pull up the lamp unit at
the same time to a height of 90cm above the bed. Let go of the collar to lock the lamp unit
into position (Fig. 11).
You can check the distance between the lamp unit and the bed by pulling out the measuring
tape.
-
-
-
-
EnglisH
9