Philips HD8821/05, Руководство пользователя

Страница: 21 / 60

4
Apply a thin layer of grease to the rails on both sides (see figure).
5
Insert the brew group as described in section 'Weekly cleaning of the
brew group'.
You can use the grease tube multiple times.
Classic milk frother cleaning (daily)
Remove the external part of the classic milk frother and rinse it with fresh
water.
Classic milk frother and steam wand cleaning (weekly)
1 Remove the external part of the classic milk frother and rinse it with fresh
water.
2 Remove the upper part of the classic milk frother from the steam wand
and rinse it with fresh water.
3
Clean the steam wand with a wet cloth.
4
Put the upper part back into the steam/hot water wand (make sure it is
completely inserted).
5
Reassemble all the classic milk frother parts.
Descaling
Aroma plus
Hot water
Steam
Espresso
Memo Memo Memo
Calc
clean
Espresso lungo Coffee
When the CALC CLEAN button lights up continuously, you need to descale
the machine. If you do not descale the machine when this button indicates
this, the machine stops working properly. In that case, repairs are not
covered by the guarantee.
Only use Saeco descaling solution to descale the machine. Saeco descaling
solution is designed to ensure optimal performance of the machine. The use
of other products may damage the machine and leave residues in the water.
You can buy Saeco descaling solution in the online shop at
www.shop.philips.com/service. The descaling procedure lasts 30minutes
and consists of a descaling cycle and a rinsing cycle. You can pause the
descaling or rinsing cycle by pressing the ESPRESSO button. To continue
the descaling or rinsing cycle, press the ESPRESSO button.
Descaling procedure
1 Remove and empty the drip tray and coffee grounds container. Place the
drip tray and coffee grounds container back into place.
2 Remove the classic milk frother from the hot/water steam wand.
3 Remove the water tank and the “” water filter from the water
tank (if present), replace it with the small white original one.
4
Pour the descaling solution in the water tank. Fill the water tank with
fresh water up to the CALC CLEAN level indication. Place the water tank
back in the machine.
21
English