19
EN
Troubleshooting
how do i reset my player?
Insert a small pin or other sharp object into the reset hole located at the bottom of the player.
Hold until the player shuts down.
if none of the above works, then you may have to use the device
Manager to recover your player:
Launch the
1
Philips device Manager
at
Start
>
Programs
>
Philips digital Audio Player
>
Opus device Manager
on your PC.
Press and hold the
2
VOL+
button while your player is connecting to the PC.
Keep holding the key until the
3
Philips device Manager
acknowledges your player and goes
into recovery mode.
Click the
4
Repair
button and follow the instructions given by the
device Manager
.
After the player has been repaired, disconnect it fr om your PC and re-start.
5
