Philips FM-2, Руководство по обслуживанию, Страница: 91 / 110

Introduction
Chapter 8 - Test and Inspection Matrix 79
Caution
General-purpose personal computers and modems are not designed to
meet the electrical safety requirements of medical devices. The RS-232 and
parallel connectors on the monitor are electrically isolated to permit safe
connections to non-medical devices, which should be connected with a
cable of sufficient length to prevent the non-medical equipment from
contacting the patient.
If a non-medical device is connected to the serial port, a recorder or
printer connected at the same time to the parallel port should be located
outside the patient vicinity, as the two interfaces are not isolated against
each other.
Introduction
This chapter contains maintenance and safety information for the FM-2
antepartum fetal monitor and its accessories.
All checks that require the instrument to be opened must be made by qualified
service personnel. Please contact your local Agilent representative when you wish
safety and maintenance checks to be carried out.
To ensure that your monitor functions properly and safely, you must adhere to
the standards stated in this manual.