14 EN
Connect to Power
WARNING!
•
Risk of product damage! Make sure that the
power supply voltage corresponds to the
voltage printed on the back or the underside of
the product.
•
Risk of electric shock! When you unplug the
power cord, always pull the plug from the
socket. Never pull the cord.
•
Before connecting the AC power cord, ensure
you have completed all other connections.
Connect the mains cable to the
AC
Socket of the unit and then into a mains
socket.
or
4
1
SoundBar
2
3
1
2
3
•
Power cord quantity and plug type
vary by regions.
Pairing with Subwoofer
(TAFW1)
FB1 soundbar can pair with TAFW1 (not
supplied) Play-Fi wireless subwoofer. To
perform manual pairing of soundbar and
subwoofer:
1
Both soundbar and subwoofer are on.
2
Switch TAFW1 subwoofer source to
Play-fi
source.
3
Goto soundbar settings menu (
)
and select “
SUB PAIR
”.
4
The soundbar will discover and pair
with the subwoofer in pairing mode.
»
Soundbar and subwoofer shall
discover each other and pair,
Soundbar shows “
SUB
” blinking
at 1Hz.
»
If pairing succeeds, soundbar
display shows “
PAIRED
”.
»
If pairing fails, soundbar display
shows “
CHECK SUBWOOFER”
.
Connect to Wi-Fi
(Wireless Operation)
(For iOS and Android version)
By connecting this unit and mobile
phones, tablets (such as iPad, iPhone,
iPod touch, Android phones, etc.) to the
same Wi-Fi network, you can then use
the Philips Sound app powered by DTS
Play-fi to control the soundbar to listen
to audio files.
1
Connect your phone or tablet to the
same Wi-Fi network that you want to
connect your soundbar
2
Download and install the Philips
Sound app powered by DTS Play-fi
on a phone or tablet.
Philips Sound
•
Make sure your router is turned on
and working properly.
3
Press and hold (Wi-Fi) button
located at the back cabinet for 8 sec
to trigger the Wi-Fi connection.
»
Until the speaker make a second
tone and then release the button.
