16
•
During USB play, press
USB
to
select one of the following play
modes.
•
ALL RPT:
repeat all the tracks
in one folder.
•
OFF RPT:
repeat mode is
turned off.
Note
•
Support a USB storage device up to 32GB.
•
This product may not be compatible with
certain types of USB storage device.
•
If you use a USB extension cable, USB
HUB, or USB multi-reader, the USB storage
device may not be recognized.
•
Digital camera PTP and MTP protocols are
not supported.
•
Do not remove the USB storage device
while it is being read.
•
DRM-protected music files (MP3) are not
supported.
•
Support a USB port: 5V , 500mA.
Set display brightness
You can press
DIM
repeatedly to select
a different brightness level of the
display panel on this product.
If you select
AUTO OFF
, LED message is
switched off after 10 seconds of button
inactivity.
Apply factory settings
In case of no response from this
product , you can reset this product to
the default settings programmed at the
factory.
1
In HDMI ARC mode (press
HDMI
ARC
), on the remote control, within
six seconds, press twice then
Volume -
once, and then hold
down
BASS -
.
MP3 player
Connect your MP3 player to play your
audio files or music.
What you need
•
An MP3 player.
•
A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio
cable, connect the MP3 player to
the
AUDIO IN
connector on this
product.
2
Press repeatedly
AUDIO IN
on the
remote control until
AUDIO IN
is
displayed on the display panel.
3
Press the buttons on the
MP3 player to select and play audio
files or music.
USB storage devices
Enjoy audio on a USB storage device,
such as an MP3 player and USB flash
memory, etc.
What you need
•
A USB storage device that is
formatted for FAT16 or FAT32 file
systems, and complies with the
Mass Storage Class.
•
An MP3 file on a USB storage
device.
1
Connect a USB storage device to
this product.
2
Press
USB
on the remote control.
3
Use the remote control to control
play.
•
Press
to start, pause or
resume play.
•
Press / to skip to the
previous or next track.
EN
