13
EN
Note
•
This product may not be compatible with certain types
of USB storage device.
•
If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
•
Digital camera PTP and MTP protocols are not
supported.
•
Do not remove the USB storage device while it is
being read.
•
DRM-protected music files (MP3) are not supported.
•
Support a USB port: 5V , 1A.
Set display brightness
You can press
DIM
repeatedly to select a
different brightness level of the display panel on
this product.
If you select
AUTO OFF
, LED message is
switched off after 10 seconds of button
inactivity.
Apply factory settings
In case of no response from this product , you
can reset this product to the default settings
programmed at the factory.
1
In HDMI ARC mode (press
HDMI ARC
),
on the remote control, within six seconds,
press twice then
Volume -
once, and
then hold down
BASS -
.
»
When the factory settings restore is
complete, the product automatically
switches off and restarts.
5 Update software
To get the best features and support, update
your product with the latest software.
Check software version
In HDMI ARC mode (press
HDMI ARC
), on
the remote control, within six seconds, press
twice then
TREBLE -
once, and then hold down
BASS -
.
»
The software version number is displayed
on the display panel.
Update software via USB
Caution
•
Do not turn off the power or remove the USB flash
drive when the software update is in progress because
you might damage this product.
1
Check the latest software version on
www.philips.com/support.
• Search for your model and click on
"Software and drivers".
2
Download the software into a USB flash
drive.
a
Unzip the downloaded file, and make
sure that the unzipped file is named
"B1. bin".
b
Put the "B1. bin" file in the root
directory.
3
Connect the USB flash drive to the
USB
connector on this product.
4
Switch this product to HDMI ARC source
(press
HDMI ARC
).
