12
EN
What you need
• A Bluetooth device which supports
Bluetooth profile A2DP, AVRCP and with
Bluetooth version as 4.1.
• The maximum operational range between
this product and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press on the remote control to switch
this product to Bluetooth mode.
»
BT
is displayed on the display panel,
blinking.
2
On the Bluetooth device, switch on
Bluetooth, search for and select
Fidelio
B1
to start connection (see the user
manual of the Bluetooth device on how to
enable Bluetooth).
»
During connection,
BT
on the display
panel blinks.
3
Wait until this product beeps.
»
When the Bluetooth connection succeeds,
BT
is displayed on the display panel.
»
If the connection fails,
BT
on the
display panel blinks continuously.
4
Select and play audio files or music on
your Bluetooth device.
• During play, if a call is coming, music
play is paused.
• If your Bluetooth device supports
AVRCP profile, on the remote control
you can press / to skip to a track,
or press
to pause/resume play.
5
To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•
The music streaming may be interrupted by obstacles
between the device and this product, such as wall,
metallic casing that covers the device, or other devices
nearby that operate in the same frequency.
•
If you want to connect this product with another
Bluetooth device, press and hold on the remote
control to disconnect the currently connected
Bluetooth device.
MP3 player
Connect your MP3 player to play your audio
files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the
AUDIO IN
connector on this product.
2
Press repeatedly
AUDIO IN
on the
remote control until
AUDIO IN
is
displayed on the display panel.
3
Press the buttons on the MP3 player to
select and play audio files or music.
USB storage devices
Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
What you need
• A USB storage device that is formatted for
FAT or NTFS file systems, and complies
with the Mass Storage Class.
1
Connect a USB storage device to this
product.
2
Press
USB
on the remote control.
3
Use the remote control to control play.
• Press
to start, pause or resume
play.
• Press / to skip to the previous or
next track.
• During USB play, press
USB
to select
one of the following play modes.
• When repeat mode is turned on,
ALL REPEAT
scrolls once on the
display panel.
• When repeat mode is turned off,
OFF REPEAT
scrolls once on the
display panel.
