16
EN
Use Philips EasyLink
The DVD player supports Philips EasyLink,
which uses the HDMI CEC (Consumer
Electronics Control) protocol. EasyLink-
compliant devices that are connected through
HDMI connectors can be controlled by a single
remote control.
Philips does not guarantee 100% interoperability
with all HDMI CEC devices.
1
Turn on the HDMI CEC operations on the
TV and other connected devices. See TVs/
devices manual for details.
2
You can now enjoy the following Philips
EasyLink controls.
Auto Wake Up TV (One-touch play)
When you press the STANDBY button, it turns
on the TV and this DVD player, then video disc
play starts.
To enable One-touch play, a video disc
•
must be placed in the disc compartment
before operation.
System Standby (One-touch standby)
When you press and hold the STANDBY button,
all connected HDMI CEC devices switch to
standby mode simultaneously.
Tip
The default setting for EasyLink features is on. You
•
can change the default setting, see chapter ‘Adjust
settings’ -
[ Video Setup Page ]
>
[ HDMI Setup ]
>
[
EasyLink ]
for details.
dvp5388K_51_en.indd 16
dvp5388K_51_en.indd 16
2009-10-13 17:34:27
2009-10-13 17:34:27