12
EN
minutes of inactivity (for example, in
pause or stop mode).
•
[DivX(R) VOD Code]
: Display
the DivX
®
registration code and
deregistration code.
Picture
1
Press .
2
Select
[Setup]
>
[Video]
to access the
video setup options.
•
[TV System]
: Select a TV system that
matches your TV. By default, this setting
matches the common TVs in your
country.
•
[Aspect ratio]
: Select a picture display
format to fit the TV screen.
•
[Progressive]
: Turn on or off the
progressive scan mode. If a progressive
scan TV is connected to this player,
turn on the progressive scan mode.
•
[Picture Setting]
: Select a predefined
color setting, or customize a setting.
•
[Closed Caption]:
Enable this feature
to show the sound effects in subtitles.
Applicable only when both a disc and a
TV support this feature.
Note
•
To achieve progressive scan pictures, make sure that
your TV supports the progressive scan feature, and
your TV is connected to this player through the
Y/Pb/
Pr
connectors.
Sound
1
Press .
2
Select
[Setup]
>
[Audio]
to access the
audio setup options.
•
[Analogue Output]
: Select an audio
format for sound output when this
player is connected through the
AUDIO OUT L/R
connectors.
•
[Digital Audio]
: Select an audio format
for sound output when this player is
connected through the
COAXIAL
connector.
•
[Digital Output]
- Select a type
of digital output:
[Off]
- Disable
digital output;
[All]
- Support
multi-channel audio formats;
[PCM
Only]
- Downmix to two-channel
audio signal.
•
[LPCM Output]
- Select a LPCM
(Linear Pulse Code Modulation)
output sampling rate. The higher
the sampling rate, the better the
sound quality.
[LPCM Output]
is
enabled only when
[PCM Only]
is
selected under
[Digital Output]
.
•
[Volume]
: Change a volume level.
•
[Sound Mode]
: Select a preset sound
effect.
•
[Night Mode]
: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
Note
•
Night mode is only available for Dolby encoded DVD
discs.
Preference (languages,
parental control...)
1
Press .
2
Select
[Setup]
>
[Preference]
to access
the preference setup options.
•
[Audio]
: Select an audio language for
video.
•
[Subtitle]
: Select a subtitle language for
video.
DVP3651K_55_UM_V1.2.indb 12
2013/3/5 15:09:43