32
EN
[ Sound Mode ]
Select a preset sound effect to enhance
the audio output.
[ 3D ]
•
– select a virtual surround sound
effect that is produced from the left and
right audio channels.
[ Movie Mode ]
•
– select a sound effect
for movies.
[ Music Mode ]
•
– select a sound effect
for music.
[ Speaker Setup ]
When you connect a speaker system, you
can optimize surround output for the
connected speakers.
[ Front Speaker ]
•
Option
Description
[ Large ]
Produce low frequency
signal below 120 Hz.
[ Small ]
Cannot produce low
frequency signal below
120 Hz.
[ Center Speaker ] / [ Surround
•
Speakers ]
Option
Description
[ Large ]
Produce low frequency
signal below 120 Hz.
[ Small ]
Cannot produce low
frequency signal below
120 Hz.
[ Off ]
No speaker is
connected.
[ Subwoofer ]
•
Option
Description
[ On ]
A subwoofer is
connected.
[ Off ]
No subwoofer is
connected.
[ Speaker Volume ]
•
– Set the volume
level of each speaker to get the ideal
audio balance.
Press
1. OK
.
Select a speaker, then press
2.
b B
to
adjust the volume.
Press
3. OK
to con rm and exit.
[ Speaker Delay ]
•
– Set the delay time
for the center, subwoofer and rear
speakers if they are placed closer to the
listening position, so that the sound
output from all speakers reach the
listening position at the same time.
Press
1. OK
.
Select a speaker, then press
2.
b B
to
set the delay time.
Press
3. OK
to con rm and exit.
Note
[ Speaker Setup ]
•
setting is only available if you have
set the
[ Analog Output ]
setting to
[ Multi Channel
]
.