manualshive.com logo in svg

Philips DVP3110, Руководство по обслуживанию, Страница: 10 / 35

Поделиться
Скачать
Philips DVP3110 Скачать руководство пользователя страница 10

Software upgrade 

Preparation to upgrade software

1)  Start the CD Burning software and create a new CD 

project (Data Disc) with the following setting: 

Label: DVP31XX   

  (No need the label name)

 File 

Name: 

DVPXXXX_XX.BIN   

Power on the set and open the tray, then press <5><5> 

    to check the File Name. 

Note: It is required capital letter for the File System 

name

2)  Burn the data onto a blank CDR 

A.  Procedure for software upgrade: 

1)    Power on the set and insert the prepared Upgrade   

CDR.

2)    The set will starts reading disc & response with the 

following display TV screen: 

Upgrade File DETECTED 

Upgrade? 

Press Play TO START. 

3)    Press <OK> button to confirm, then screen will display :   

Files coping… 

UPGRADING…

4)    The upgraded disc will automatically out when files 

coping complete, then take out the disc. 

5)

About 1 minute later, the tray will automatically close

when upgrading complete.   

B. Read out the software versions to confirm upgrading 

1)  Power on the set and press <Setup> button on the 

remote control. 

2)  Press<1><3><7><9>button to check the software 

information.

The software version and other information are display 

on the TV screen as follows: 

Version      XX.XX.XX.XX (Main version) 

SUB-VER    XX.XX.XX.XX (software version of  

application software) 

8032        XX.XX.XX.XX 

Servo       XX.XX.XX.XX (software version of 

Servo)

RISC        XX.XX.XX.XX 

DSP                  XX.XX.XX.XX 

Region Code      X 

3-1

Caution: The set must not be power off during 

upgrading, Otherwise the Main board will be 

damaged entirely.   

All manuals and user guides at all-guides.com

Содержание DVP3110




































Отзывы:

Нет отзывов