12
EN
Sound
1
Press .
2
Select
[Setup]
>
[Audio]
to access the
audio setup options.
•
[Analogue Output]
: Select an audio
format for sound output when this
player is connected through the
AUDIO OUT L/R
connectors.
•
[Digital Audio]
: Select an audio format
for sound output when this player is
connected through the
COAXIAL
connector.
•
[Digital Output]
: Select a type
of digital output:
[Off]
- Disable
digital output;
[All]
- Support
multi-channel audio formats;
[PCM
Only]
- Downmix to two-channel
audio signal.
•
[LPCM Output]
: Select a LPCM
(Linear Pulse Code Modulation)
output sampling rate. The higher
the sampling rate, the better the
sound quality.
[LPCM Output]
is
enabled only when
[PCM Only]
is
selected under
[Digital Output]
.
•
[HDMI Audio]
: Enable or disable
the audio output through HDMI
connection.
•
[Audio Sync]
: Set a delay time for
audio output to match the video play.
•
[Volume]
: Change a volume level.
•
[Sound Mode]
: Select a preset sound
effect.
•
[Night Mode]
: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
Note
•
Night mode is only available for Dolby encoded DVD
discs.
Preference (languages,
parental control...)
1
Press .
2
Select
[Setup]
>
[Preference]
to access
the preference setup options.
•
[Audio]
: Select an audio language for
video.
•
[Subtitle]
: Select a subtitle language for
video.
•
[Disc Menu]
: Select a menu language
for a video disc.
•
[Parental Control]
: Restrict access to
discs that are encoded with ratings.
Input "136900" to access the restriction
options: When the password field
is highlighted, press
OK
to enter an
input stage, press to select a digit
and press / to change a digit
position.
•
[PBC]
: Display or skip the content
menu for VCD and SVCD.
•
[Password]
: Set or change a password
to play a restricted disc. Input "136900"
if you do not have a password or if you
have forgotten your password
•
[DivX Subtitle]
: Select a character set
that supports the subtitle of your DivX
video.
•
[Version Info]
: Display the software
version for this player.
•
[Default]
: Reset all settings to the
factory default, except for the settings
for
[Disc Lock]
,
[Parental Control]
and
[Password]
.
Note
•
If your preferred language is not available for disc
language, audio or subtitle, you can select
[Others]
from the menu options and input 4-digit language code
which can be found at the back of this user manual.
•
The rating levels are country-dependent. To allow all
discs to be played, select
[8 Adult]
.
DVP2880 2882 2886 2888_93_UM_V2.0.indb 12
10/9/2014 2:36:08 PM