3139 246 13543
35
No return to start-up screen when
– Reset the unit by switching the player off, then on
disc is removed
again.
The player does not respond to
– Aim the Remote Control directly at the sensor
the Remote Control
on the front of the player.
– Reduce the distance to the player.
– Replace the batteries in the Remote Control.
– Re-insert the batteries with their polarities (+/–
signs) as indicated.
Buttons do not work
– To completely reset the player, unplug the AC
cord from the AC outlet for 5-10 seconds.
Player does not respond to some
– Operations may not be permitted by the disc.
operating commands during playback.
Refer to the instructions of the disc jacket.
DVD Player cannot read
– Use a commonly available cleaning CD/DVD to
CDs/DVDs
clean the lens before sending the DVD Player for
repair.
Menu items cannot be selected
– Press STOP twice before selecting System Menu.
– Depending on the disc availability, some menu items
cannot be selected.
Unable to play DivX movies
– Check that the DivX file is encoded in ‘Home
Theater’ mode with DivX 5.x encoder.
Unable to select Progressive Scan on/off
– Check that the output of the video signal is switch to
‘YUV’.
No sound during DivX movies playback
– The audio codec may not be supported by the DVD
player.
An MPEG-4 or DivX movies does
– Check that file size of the movies does not exceed
not repeat
the file size of the CD disc during burning.
Unable to select the DVD Player’s front
– Multichannel and Progressive Scan on the front panel
panel Multichannel and Progressive Scan
is LED indicator. They do not function as a button
feature.
Troubleshooting
Problem
Solution
Visit us at www.p4c.philips.com for service support
01-40 DVP720_EU_051
3/08/2004, 4:44 PM
35