21
Getting Started
(continued)
TIPS:
The underlined option is the factory default setting.
Press
W
to go back to previous menu item. Press
SETUP
to exit the menu item.
Step 4 : Selecting the
matching colour system
The colour system of the DVD player,
disc and TV should match in order for
the disc to play. Before changing the TV
system, determine the colour system of
your TV.
TV Type
TV Display
Progressive
Picture Setting
Video Setup Page
Component
HD JPEG
HDMI Video Setup
NTSC
PAL
Multi
A
Press
SETUP
.
B
Press
X
to select {
Video Setup Page
}.
C
Press
S
T
repeatedly to select {
TV
Type
}, then press
X
.
D
Use
S
T
to select one of the options
below:
{
PAL
}
Select this if the connected TV has the
PAL colour system. It will change the
video signal of an NTSC disc and output
it to PAL format.
{
NTSC
}
Select this if the connected TV has the
NTSC colour system. It will change the
video signal of a PAL disc and output it to
NTSC format.
{
Multi
}
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
E
Select a setting and press
OK
.
Follow the instructions show on the
TV to confi rm the selection.
CHANGING PAL TO NTSC:
1.ENSURE THAT YOUR TV SUPPORTS
NTSC STANDARD.
2.IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV , WAIT 15
SECONDS FOR AUTO RECOVERY.
OK CANCEL
CONFIRM AGAIN TO USE NEW TV
TYPE SETTING.
OK CANCEL
F
Press
W
to highlight {
OK
} and press
OK
to confi rm..
To reset to previous TV colour
system:
Wait for 15 seconds for the auto
recovery.
OR
A
Press
OPEN/CLOSE
ç
on the DVD
player to open the disc tray.
B
Press
numeric keypad ‘3’
on the
remote control for few seconds.
The DVD background menu appears.
Tips:
– Before changing the current TV colour
setting, ensure that your TV supports the
‘selected TV Type’ system.
– If there is no proper picture on your TV,
wait for 15 seconds for auto recovery.
dvp5980MKll_05_eng.indd 21
dvp5980MKll_05_eng.indd 21
2007-08-20 5:53:42 PM
2007-08-20 5:53:42 PM