English
26
DVD Setup Menu Options
Audio Setup Menu
1
In disc mode, press
SETUP
.
2
Press
1
2
to select ‘Audio Setup’.
3
Press
OK
to confirm.
Setting the Downmix
This options allows you to set the stereo
analog output of your DVD Player.
1
In ‘AUDIO SETUP PAGE’, press
3
4
to
highlight {DOWNMIX}, then press
2
.
STEREO
Select this to change channel output to
stereo which delivers sound from only the
two front speakers.
LT/RT
Select this option if your DVD Player is
connected to a Dolby Pro-Logic decoder.
2
Press
3
4
to select a setting, then press
OK
to confirm your selection.
Digital Audio Setup
The options included in Digital Audio
Setup are: ‘Digital Output’ and ‘LPCM
Output’.
1
In ‘AUDIO SETUP PAGE’, press
3
4
to
highlight {DIGITAL AUDIO}, then press
2
.
2
Press the
3
4
keys to highlight an option.
3
Enter its submenu by pressing
2
.
4
Press
3
4
to select a setting, then press
OK
to confirm your selection.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜
SPDIF Off
: Turn off the digital output.
➜
All
: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜
PCM Only
: Only if your receiver is
not capable of decoding multi-channel
audio.
Helpful Hints:
–
If DIGITAL OUTPUT is set to ‘All’, all
audio settings except MUTE are invalid.
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM’.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
➜
48K
: Playback a disc recorded at the
sampling rate of 48kHz.
➜
96K
: Playback a disc recorded at the
sampling rate of 96kHz.
TIPS:
The underlined option is the factory default setting.
Press
1
to go back to the previous menu item. Press
SETUP
to exit the menu item.
General
Audio
Video
Preference
Downmix
Digital Audio
- - Audio Setup Page - -
01-35_DVP4050_55_Eng2
23/01/06, 3:58 PM
26