16
2
Insert one end of the supplied aerial cable into the
TV
socket at the
back of the DVD recorder and the other end into the aerial input
socket at the back of the TV set.
3
Plug a scart cable into the scart socket
EXT 1 TO TV-I/O
at the
back of the DVD recorder and the scart socket for the DVD
recorder at the back of the TV set (see TV set operating instructions).
My TV set has several scart sockets. Which one should I use?
Select the scart socket that is suitable for both video output and for video
input.
My TV set shows me a selection menu for the scart socket
Select 'VCR' as the source for this scart socket.
?
4
Switch on the TV set.
5
Insert one end of the supplied mains cable into the mains socket
4
MAINS
at the back of the DVD recorder and the other end into
the wall socket. '
IS TV ON?
' will appear on the display.
6
If the connection was properly made and your TV was
automatically
switched
to the programme number for the scart socket, e.g. 'EXT',
'0', 'AV', you will see the following picture:
Virgin mode
Menu Language
English
Español
Français
Italiano
Deutsch
Press OK to continue
a
My screen is empty.
b
Many TV sets are switched by the DVD recorder to the programme
number for the scart socket by way of a control signal sent through the
scart cable.
b
If the TV set does not automatically switch to the scart socket programme
number, manually change to the corresponding programme number on your
TV set (see your TV's operating instructions).
b
Check that the scart cable is connected from the TV set to the
EXT 1
TO TV-I/O
socket on the DVD recorder. The
EXT 2 AUX I/O
socket is
intended only for additional devices.
Problem
Then, read the paragraph on 'Initial installation' in 'Installing your DVD recorder'.
Connecting the DVD recorder
Содержание DVDR890
Страница 3: ......