Philips DVD963SA, Руководство по обслуживанию, Страница: 18 / 82

Diagnostic Software, Trouble Shooting and Test Instructions
EN 32 DVD963SA 5.
Table 5-7 Log (Error logging in Nvram)
Table 5-8 Miscellaneous
Table 5-9 Basic engine
Table 5-10 Furore IC
Table 5-11 Karaoke (not available)
5.7.3 Menu Mode Interface
Activation
Switch the player on and the following text will appear on the
screen of the terminal (program):
Figure 5-38 Screen menu
The first line indicates that the Diagnostic software has been
activated and contains the version number. The next lines are
the successful result of the SDRAM interconnection test and
the basic SDRAM test. The last line allows the user to choose
between the four possible interface forms. If pressing M has
made a choice for Menu Interface, the Main Menu will appear.
Layout of Menu and Submenu
The following menu layout will appear after starting up the DVD
player in menu mode. The symbol “- - -”” indicates that the
current menu choice will invoke the display of a submenu. The
number between [ ] idicates the nucleus number. These
numbers will not be shown on the screen.
Menus
MAIN MENU
1
Audio...
2 Video...
3 Front Panel...
Ref. # Reference Name Remark
31 LogReadErr Read last Errors
32 LogReadBits Read errors Bits
33 LogReset Reset
Ref. # Reference Name Remark
34 MiscReadConfig Read Configuration area
from NVRAM
35 MiscNvramReset NVRAM Reset
36 MiscNvramMod Modify NVRAM contents
46 MiscApplVer Read version of
application software
47a MiscTrayOpenNr Read the number of
times the tray opened
47b MiscPowerOnTime Read the total time the
player's power has been
on
47c MiscPlayTimeCddaVcd Read the Playtime of
CDDA and VCD discs
47d MiscPlayTimeDvd Read the Playtime of
DVD discs
Ref. # Reference Name Remark
37 BeVer Version number
38a BeFocusOn Focus On
38b BeFocusOff Focus Off
39a BeDiscmotorOn Discmotor On
39b BeDiscmotorOff Discmotor Off
40a BeRadialOn Radial control On
40b BeRadialOff Radial control Off
41a BeSledgeIn Sledge Inwards
41b BeSledgeOut Sledge Outwards
42a BeGroovesIn jump Grooves to Inside
42b BeGroovesMid jump Grooves to Middle
42c BeGroovesOut jump Grooves to Outside
43a BeTrayIn Tray In
43b BeTrayOut Tray Out
44 BeReset Reset Basic Engine
58a LaserCdOn CD Laser on
58b LaserCdOff CD Laser off
58c LaserDvdOn DVD Laser on
58d LaserDvdOff DVD Laser off
70 BedReadFlashID Read flash memory
manufacturer and device ID
71 BedCalcRomChks
um Calculate ROM checksum
72 BedScratchTest Test scratch detection circuit
Ref. # Reference Name Remark
63 Furore_SdramWrR Furore SDRAM Write Read
test
64 Furore_SdramWrR
Fast Furore SDRAM
interconnection test
65 Furore_Id Furore version ID check
83 Furore_Reset Furore reset
84a Furore_High Sets Furore output pins
DSD_PCM0-9 to high
84b Furore_Low Sets Furore output pins
DSD_PCM0-9 to low
Ref. # Reference Name Remark
48a KaraokeModeOff Switch Karaoke mode off
48b KaraokeModeOn Switch Karaoke mode on
49 KaraokeMicInput Check path from the
microphone input to audio
output
50a KaraokeKeyOn Set Karaoke Key to the
maximum level (1200 cent)
50b KaraokeKeyOff Set Karaoke Key to flat octave
(0 cent)
51a KaraokeEchoOn Set Echo Control fuction on
51b KaraokeEchoOff Set Echo Control function off
Ref. # Reference Name Remark
CL 26532105_059.eps
020902
DVDv4 Diagnostic Software version 5.03
SDRAM Interconnection test passed
Basic SDRAM test passed
Slave Processor: SLAVE2
(M)enu, (C)ommand or (S)2B interface ? [M]:@ <enter>
Press ENTER to go to main menu
CC: > <enter>
MAIN MENU
1. Audio ...
2. Video ...
3. Front Panel ...
4. Basic Engine ...
5. Processor Peripherals ...
6. Error Log ...
7. Furore ...
8. Miscellaneous ...
Select >