Philips DVD793C, Руководство пользователя

Страница: 23 / 28

23
Before Requesting Service
If it appears that the DVD Player is faulty, first consult this checklist. It may be that something has been overlooked. Under no
circumstances should you attempt to repair the system yourself; this will invalidate the warranty.
Look for the specific symptom(s). Then perform only the actions listed to remedy the specific symptom(s).
Symptom Remedy
No power
– Make sure the power cord is connected properly.
– Make sure there is power at the AC outlet by plugging in another
appliance.
No picture – Check if the TV is on.
– Check the video connection. See page 11.
– Make sure the TV is on the correct Video In or Auxiliary channel. See your
TV manual for details.
Distorted picture – Check the disc for fingerprints. Clean the disc with a soft cloth, wiping from
center to edge.
– Sometimes a small amount of picture distortion may appear. This is not a
malfunction.
No sound – Check audio connections.
– If you are using a HiFi amplifier, try another sound source.
– If you are using a Receiver, select the DVD Player as the sound source at the
receiver.
– Some Audio CDs available on the market are copy-protected or enhanced.
These discs will not play on this DVD Player. See your retailer to purchase
non-protected Audio CDs.
– Check the Audio setting of a DVD in the DVD Disc menu, if available, and
adjust as necessary. Check the DTS (Digital Theater Systems) or Dolby
Digital options available on the DVD.
Distorted sound from HiFi amplifier – Make sure no audio connections are made to the amplifier’s phono input.
No audio at digital output – Check the digital connections.
– Check the settings menu to make sure the digital audio output is set correctly.
See page 14.
– Check if the audio format of the selected audio language matches your
receiver capabilities.
Disc can not be played. – Ensure the disc label is facing up.
– Clean the disc.
– Check if the disc is defective by trying another disc.
– Check if the disc is badly scratched or warped (not flat).
No return to start-up screen when – Reset by switching the DVD Player off, then on again.
disc is removed – Check to see if the Program requires another disc to be loaded.
The DVD Player does not respond to – Aim the remote control directly at the DVD Player.
the remote control. – Remove any obstacles between the DVD Player and the remote control.
– Inspect or replace the batteries in the remote control.
Buttons do not work. – In order to completely reset the player, unplug the AC power cord from the
AC
outlet.
DVD Player does not respond to some – Operations may not be permitted by the disc. Refer to the instructions or
operating commands during menu of the disc. If appears, the feature is not available on the disc.
playback.
DVD Player cannot read – You can only play finalized discs. If you are using CD-ROM, CD-R or CD-RW
CDs/DVDs. discs, make sure you have finalized the discs. Refer to your CD Recorder
owner’s manual for details.
B
EFORE
R
EQUESTING
S
ERVICE