Philips DVD730K/691, Руководство по обслуживанию, Страница: 44 / 60

11
Audio connection
Connect Audio output to TV
0 0 0 0 0
Use the TV speaker for sound reproduction, connect the audio left and right
channel sockets on the player rear panel to the corresponding sockets on
your TV with the audio cable. (supplied)
Connecting to an A/V receiver equipment
Digital multi-channel connection provides the best sound quality. For this you
need a multi-channel receiver that supports one or more of the audio formats
supplied by your DVD player (Dolby Digital
TM
, MPEG 2 and DTS). Check the
receiver manual and the logos on the front of the receiver.
Connect to A/V receiver with digital coaxial cable
0 0 0 0 0 Connect the player's digital coaxial output to the corresponding input on the
receiver using the normal audio or video cable which is supplied in the pack-
age.
0 0 0 0 0
You might need to set the item [AUDIO] in setup menu for adapting your
receiver. Please refer to the chapter [Setup Menu] for details.
0 0
0 0
0
In this case, do not use the player's audio left and right output.
Connect to A/V receiver with digital optical cable
0 0 0 0 0 Connect the player's digital optical output to the corresponding input on the
receiver using the digital optical cable (not supplied).
0 0 0 0 0
You might need to set the item [AUDIO] in setup menu for adapting your
receiver. Please refer to the chapter [Setup Menu] for details.
NOTE:
- If the audio format of the digital output does not match the capabilities
of your receiver, the sound will be muted.
MAINS
Connection