background image

32

10 July 2000

Diamond Line Amplifiers

Model Numbers (module only) 

Diamond Line 2 amplifier models vary in three ways: highest 
forward frequency, automatic level and slope control (ALSC) 
pilot frequency, and station output tilt. For example, model 
6-G3A298/37–42/54–433–100 (variable elements 
underlined) specifies the following:

a highest forward frequency of 870 MHz,

a 433.25 MHz ALSC pilot frequency, and

10 dB station output tilt over the forward bandwidth.

Figure 9.  Diamond Line 2 Amplifier, Model Numbers

The Diamond Line 2 amplifier modules vary in highest forward 
frequency, ALSC pilot frequency, and station output tilt.

6 – G3A29_ /_ _– 42/54 – 4 _ _ – _ _ _

2 Output Hybrids
(Diamond Line 2 
Amplifier)

Station Gain 
37 dB
40 dB
(incl. losses from 
ALSC and 1 dB loss 
from input equalizer)

42/54 Bandsplit (diplex filter)
5–42 MHz, return
54 MHz and up, forward

Highest Forward 
Frequency—
7 = 750 MHz
8 = 870 MHz

ALSC Pilot Frequency—
for example
427 = 427.25 MHz
433 = 433.25 MHz
499 = 499.25 MHz

Same for Diamond 
Line 2 & 3 Amplifiers

Power Doubling™
Technology

Station Output Tilt 
(over the forward 
bandwidth)—
080 = 8.0 dB
125 = 12.5 dB
110 = 11.0 dB
100 = 10.0 dB
147 = 14.7 dB

Series 9 
(1 GHz platform)

Содержание Diamond Line 2

















Отзывы: