16
Set the sleep timer
This unit can switch to standby automatically
after a set of time.
1
When the unit is on, press
SLEEP
repeatedly to select a set of time (in
minutes).
»
When sleep timer is activated, the
display shows .
To deactivate sleep timer
1
Press
SLEEP
repeatedly until “off” is
displayed.
»
When sleep timer is deactivated,
disappears.
Listen to an external device
You can also listen to an external audio device
through this unit.
1
Press
AUX
to select MP3 link source.
2
Connect the supplied MP3 link cable to:
•
the
MP3 LINK
jack on this unit
•
the headphone jack on the device
3
Start to play the device. (See the device
user manual)
9 Other features
Set the alarm timer
Note
•
This player can set the Disc, Tuner, or iPod/iPhone as
the source for the alarm timer.
1
Make sure that you have set the clock
correctly.
2
In standby mode, press and hold
TIMER
.
3
Press
DISC
,
TUN
, or
iPhone/iPod
to select
a source.
4
Press
TIMER
to confirm.
»
The hour digits are displayed and begin
to blink.
5
Press /
to set the hour.
6
Press
TIMER
to confirm.
»
The minute digits are displayed and
begin to blink.
7
Press /
to set the minute.
8
Press
TIMER
to confirm.
»
The timer is set and activated.
Activate and deactivate alarm timer
1
In the standby mode, press
SLEEP/TIMER
repeatedly to activate or deactivate timer.
»
If timer is activated, the display shows
.
»
If timer is deactivated, disappears.
Tip
•
Alarm timer is not available in MP3 LINK mode.
•
If the DISC/iPod/iPhone source is selected but no disc
inserted or no iPod/iPhone connected, the system will
switch to the tuner source automatically.
EN
DCM186B_79_UM_V1.0.indd 16
2011/8/29 11:13:01
