Philips D460, Расширенная пользовательская документация

Страница: 31 / 54

29 EN
[On] [On]
is displayed and
changed to when
the ECO+ mode is
activated in standby
mode.
Name the handset
The name of the handset can be up
to 14 characters. It is displayed on the
handset screen in standby mode.
1
Select [Menu] > [Phone setup] >
[Phone name]
, then press
[OK]
to
confirm.
2
Enter or edit the name. To erase a
character, press
[Clear] .
3
Press [OK] to confirm.
»
The setting is saved.
Set the date and time
For information, see 'Set the date and
time (see ‘Set the date and time’ on
page 10)'.
Set the display language
Note
•
This feature only applies to models with
multiple-language support.
•
Languages available vary from country to
country.
1
Select [Menu] > [Phone setup] >
[Language] , then press [OK] to
confirm.
2
Select a language, then press
[OK]
to confirm.
»
The setting is saved.
Auto answer
When you activate the auto answer
feature, you can connect to the
incoming call automatically once
you pick up the handset. When you
deactivate this feature, you have to
press or to answer the incoming
call.
1
Select [Menu] > [Phone setup] >
[Auto answer] , then select [OK] to
confirm.
2
Select [On] / [Off] , and select [OK]
to confirm.
» The setting is saved.
Activate/Deactivate auto
hang up
You can activate the auto hang up
function so that you can end a call
by simply placing the handset on the
base station or charge cradle.
1
Select [Menu] > [Phone setup] >
[Auto hang-up] , then press [OK] to
confirm.
2
Select [On] / [Off] , then press [OK]
to confirm.
»
The setting is saved.
Note
•
When auto hang up is deactivated, you
can put the handset to the base station or
charging cradle and continue with your call
through the speaker.